Products


Matches: 52
Hardware : Scanners

Product Name: 2D Scanners
Company: 3D Laser Mapping

The Riegl LMS-Q series 2D laser scanners provide accurate non-contact line scanning using narrow infrared laser beams. The instruments make use of the precise time-of-flight laser range measurement principle and of fast line scanning by means of a high-speed opto-mechanical scan mechanism, providing fully linear, unidirectional and parallel scan lines.

Product Name: 3D Scanning
Company: 3D Laser Mapping

The combination of a high-performance laser imaging sensor and a high-resolution digital camera provides a wealth of information which lends itself to a broad range of applications, from 3D-modelling and documentation, to coastal mapping, vegetation mapping, and rapid topographic surveys.

Product Name: Airborne Scanning
Company: 3D Laser Mapping

3D Laser Mapping Ltd are recognized experts in the field of airborne laser mapping. With a range of hardware and software solutions, the applications for this technique are wide and far ranging. Airborne LiDAR is a relatively new land surveying technique, which is based on high precision laser scanners, the Global Positioning System (GPS) and Inertial Navigation Systems (INS). Combined, they allow the positioning and orientation of the footprint of a laser beam as it hits an object, to a high degree of accuracy.

Product Name: Hand-held Mobile Mapping
Company: 3D Laser Mapping

3D scanner capable of capturing accurate 3D point clouds of any scene – even in areas with no GPSKey Features:
  • Rapid scanning of large areas – scan at walking speed
  • Portable – the scanner goes wherever you go
  • Long lasting – data capture all day long
  • Versatile – ideal in areas with no GPS
  • Cost effective – no need for expensive software or high-end computers
  • Simple to use – only basic training required to operate
  • Automatic data processing – no processing staff required
  • Lightweight – hand-held unit weighs less than 700g

Product Name: Laser Units
Company: 3D Laser Mapping

The RIEGL LMS-Q series of laser scanners make use of the pulsed time-of-flight range measurement principle and beam scanning by means of an opto-mechanical scan mechanism, providing fully linear, unidirectional and parallel scan lines. The instruments are extremely rugged, therefore ideally suited for the installation on aircraft and are also compact and lightweight enough to be installed in small single-engine planes, helicopters or RPVs.

Product Name: Mining & Monitoring
Company: 3D Laser Mapping

SiteMonitor is a state-of-the-art laser measurement-based system, with a number of modules designed to solve common problems in mine measurement.SiteMonitor Slopes is designed to measure and monitor the stability of rock faces, landslips and man-made structuresSiteMonitor Volumes has been developed for on-going, periodic measurement of volumes - stockpiles, cutbacks, and waste dumps SiteMonitor Mobile unlocks the performance of high-speed laser scanning for regular mapping of large areas by mounting the scanner on a vehicle

Product Name: Mobile Scanning
Company: 3D Laser Mapping

Mobile Mapping Systems (MMS) use laser scanning technology combined with a navigation system to scan highways, waterways, and buildings from a moving vehicle. MMS' can be mounted on various types of vehicle, including automobiles, boats and trains. This flexibility allows for numerous applications including highway mapping, coastal, river and canal surveying, city modelling and flood mapping to name just a few.

Product Name: Terrestrial Scanning
Company: 3D Laser Mapping

As experts in terrestrial laser mapping, 3D Laser Mapping Ltd integrate RIEGL laser scanner hardware systems with our own and third party software and peripherals to create robust and practical high-resolution 3D surveying systems. The combination of a high-performance laser imaging sensor and a high-resolution digital camera provides a wealth of information which lends itself to a broad range of applications, from 3D-modelling and documentation, to coastal mapping, vegetation mapping, and rapid topographic surveys.

Product Name: Imatizer 2305 Photogrammetric Scanner
Company: Beijing Geo-Vision Tech.Co.,Ltd.

Imatizer 2350 Photogrammetric Scanner is a professional large-format film-based high-precision image digitizer. As the senior front-end equipment in photogrammetry, all indexes and images quality can meet the production requirements of surveying and mapping.

Product Name: Leica ScanStation 2
Company: Cyra Technologies, Inc.(Acquired by Leica Geosystems)

With a 10-times boost in maximum instantaneous scan speed and the full freedom and accuracy of a total station, Leica ScanStation 2 lifts laser scanning to the next level. This speed and productivity boost builds on the already industry-leading versatility of the ScanStation™ class of laser scanner to make High-Definition Surveying™ (HDS™) profitable for even more as-built and topographic survey projects.

Product Name: Leica ScanStation C10
Company: Cyra Technologies, Inc.(Acquired by Leica Geosystems)

The versatile Leica ScanStation C10 includes a high-accuracy/long-range scanner, tilt sensor, battery, controller, data storage, auto-adjusting video camera and laser plummet all in one compact, portable instrument. The ScanStation C10 also features major productivity advances, including a Smart X-Mirror™ design that lets users conduct full-dome scans in literally a few minutes using a spinning mirror or conduct small area scans efficiently with Smart X-Mirror’s oscillating mode.   With up to 300m range and unequalled versatility for site, exterior, and interior applications, the Leica ScanStation C10 makes High-Definition Surveying™ (HDS™) profitable for even more as-built, topographic, incident scene, and monitoring surveys.

Product Name: Leica ScanStation C5
Company: Cyra Technologies, Inc.(Acquired by Leica Geosystems)

For organizations entering into laser scanning for as-built and engineering surveys, the affordable Leica ScanStation C5 represents a great starting platform: high performance laser scanner, power supply, data storage, touch screen interface, video camera, and laser plummet all in one instrument.   Users can add additional performance and versatility over time to support expanding client opportunities. Leica ScanStation C5 owners can easily add longer range, even faster scan speed, high-accuracy dual-axis compensation for standard survey workflows, and a high-resolution internal camera for color mapping.

Product Name: Leica ScanStation P20
Company: Cyra Technologies, Inc.(Acquired by Leica Geosystems)

NEW! Ultra-high speed scanners (up to 1 million points/second) are known for their ultra-fast scan speeds and often higher level of detail. To this, the break-through, compact Leica ScanStation P20 also brings unprecedented data quality at range (120m, max), plus outstanding environmental capabilities, survey-grade tilt compensation, and an industry first "Check & Adjust" capability.

Product Name: Analytical Photogrammetric Station «Stereoanagraph»
Company: GeoSystem

High precision stereoplotter for mapping and triangulation

Product Name: Color Photogrammetric Scanner "DeltaScan"
Company: GeoSystem

There are different scanner models on the same mechanical basis. All scanners have the same resolution, geometric and radiometric parameters, etc. First, professional model has fully automatic film-roll system, second, has manual roll. All the models can scan cut images.

Product Name: IDEAL Large Format High Quality Scanners
Company: GIS Services

IDEAL/Contex Scanning Technology is the leading manufacturer of wide-format color and monochrome scanners and an expert developer of advanced scan and copy software for these products.

Product Name: IDEAL / Contex FLEX50i
Company: IDEAL

Expand your business opportunities with Contex’s versatile FLEX50i scanner featuring Contex’s advanced CCD technology ensuring picture-perfect imaging results for color and monochrome scanning - every time.

Product Name: IDEAL / Contex HD 5450 Color Scanner PLUS
Company: IDEAL

Expand your business opportunities with Contex’s versatile HD5450 scanner featuring advanced technology and quality imaging for color and monochrome scanning. The large 54” imaging area is designed to facilitate archival and reprographic tasks with a wide variety of large technical documents, detailed maps and drawings, or color posters and architectural sketches – all at the highest resolution and speed.

Product Name: IDEAL / Contex MAGNUM G600 Basic Color Scanner
Company: IDEAL

The IDEAL/Contex MAGNUM G600 Basic Color Scanner provides the best possible, 54' wide scan-to-print for color renderings, maps, and large color graphics where color fidelity is very important. The IDEAL/Contex MAGNUM G600 Basic Color Scanner is used in the GIS, Reprographics, CAD, and Graphic Arts industries for color classification for vectorization, storage, retrieval, conversion to CAD, Scan-to-web, and Scan-to-Print. This scanner can efficiently rasterize drawings up to 54” wide (E-Size) by any length on media up to 0.6” thick. The IDEAL/Contex MAGNUM G600 Basic Color Scanner can be used stand-alone or as an integrated component of a customized solution.

Product Name: IDEAL / Contex Puma G600 Basic Color Scanner
Company: IDEAL

The IDEAL/Contex Puma G600 42" Basic Color Scanner is a cost-effective scanner with an embedded copying and scanning system in the hardware. There is an easy-to use iJET Panel to control the copying and scanning operations. The iJET Panel contains an elaborate menu system that enables setup and activation of full scan-to-print and scan-to-file options directly from the scanner. This scanner is designed for the CAD, GIS, Reprographics, Sign Shops, Copy Shop, POP and Display markets that handle large format color graphics.

Product Name: IDEAL / Contex SD4450 Color Scanner
Company: IDEAL

SD large format scanners give companies an easy and affordable way to save time on in-house scanning activities. You get exceptional professional-grade performance with true 1200dpi optical resolution with speeds of up to 10 inch/second. The Contex SD4400 series is designed for high-volume productivity for businesses-critical imaging tasks.

Product Name: IDEAL / Wicks & Wilson ACS C250
Company: IDEAL

The IDEAL/Wicks & Wilson ACS C250 is a cost-effective solution designed for fast, high volume scanning of aperture card based engineering drawings & scientific documents for use in conversion to CAD, archive and retrieval, and Product Data Management (PDM) applications. The IDEAL/Wicks and Wilson ACS C250 can scan ISO aperture cards at 350 cards per hour at 200 dpi and 250 cards per hour at 400 dpi.

Product Name: UltraScan 5000
Company: Inpho GmbH

UltraScan 5000 from Vexcel is inpho’s high precision photoscanner for digitizing traditional aerial imagery. It combines high geometric accuracy with excellent radiometric performance being ideally suited to most demanding projects in digital photogrammetry.

Product Name: AutoScan
Company: Intergraph Corporation

AutoScan provides automatic (unattended) scanning of roll feed-based films. This product offers a user-friendly interface and is designed for use with a PhotoScan system with the optional roll feed system. PhotoScan® is a standalone, network-ready photo digitizing system.

Product Name: CASI 1500
Company: ITRES Research Limited

Our flagship hyperspectral imager. The CASI-1500 offers an impressive 1500 pixels across its field of view, allowing you to image a vast area with a single pass, or get spatial resolutions as high as 25 cm using a standard fixed-wing aircraft.

Product Name: CASI 550
Company: ITRES Research Limited

Our most compact VNIR spectrographic imaging system provides you with higher resolution, faster scanning, plus the highest sensitivity of any instrument in its class. Our new custom sensor array is designed to optimize sensitivity over the entire available spectum.

Product Name: SASI 600
Company: ITRES Research Limited

The SASI-600 has undergone a mechanical redesign that has reduced its size by up to 30% as compared to previous models.

The finest hyperspectral SWIR imaging system available  today, Itres' SASI-600 offers 100 bands of noise-free, high fidelity imagery over the short-wave infrared spectrum

Product Name: TABI 320
Company: ITRES Research Limited

The TABI-320 is an incredibly sensitive thermal broadband imager at a great price.

This sensor can distinguish temperature differences as small as one-tenth of a degree, and numerous specially designed failsafe features ensure that your images will be crisp and clear. This system produces images of such fidelity that you will be easily able to map underground tunnels, submerged water currents, structural heat seapage, and virtually any thermal effect that you could imagine.

Product Name: TABI-1800
Company: ITRES Research Limited

The TABI-1800 is a thermal broadband imager which follows the same philosophy as the TABI-320 while offering new technologies which improve sensitivity and increase the swath from 320 pixels to 1800 pixels.

Product Name: TASI 600
Company: ITRES Research Limited

The TASI 600 is the only commercially available, airborne-based, pushbroom hyperspectral thermal sensor system (to the best of our knowledge).

Product Name: Trimble GeoExplorer 6000 series
Company: KOREC

The Trimble® GeoExplorer® 6000 series is designed for utility companies, municipalities, environmental management agencies, and many more, where timely accurate information is paramount to good decision making.

Product Name: TruPulse™ 200
Company: Laser Technology, Inc.

A low-cost workhorse for professional measurement. The TruPulse 200 reflectorless laser rangefinder incorporates an integrated tilt sensor for height measurements, through-the-lens targeting, in-scope data display and advanced targeting modes to easily provide accurate distance and height data for Forestry, Telecom, T&D and GIS professionals.

Product Name: LaserAce® SLM
Company: Measurement Devices Limited

The LaserAce® SLM module is a compact, rugged, class 1 eye-safe, multipurpose scanning distance meter for integration into OEM applications.

Product Name: Scanning Laser Module (SLM)
Company: Measurement Devices Limited

The LaserAce® SLM module is a compact, rugged, class 1 eye-safe, multipurpose scanning distance meter for integration into OEM applications. Giving a reflectorless range of up to 150m (500ft), they can be additionally integrated into other equipment and suitable software for a variety of applications. For example collision avoidanc

Product Name: Optech ALTM 3100EA Topographic LiDAR Sensor
Company: Northrop Grumman Corporation

The ALTM 3100EA (Enhanced Accuracy) provides 3001 with one of the most advanced airborne laser scanning systems commercially available. The ALTM 3100EA features include a shot-to-shot elevation accuracy of better than 5 cm, pulse repetition rates as high as 100 kHz, multiple digital imaging applications, platform independent operation, and adjustable scan angle, scan frequency, and pulse repetition frequency.

Product Name: Lasertape - FG21
Company: Riegl USA. Inc

Main Applications-
Topography & Mining, Monitoring & Civil Engineering, Archaeology & Cultural Heritage Documentation, Architecture & Facade Measurement

Product Name: LD90 - 3
Company: Riegl USA. Inc

The sensors of series LD90-3 are based upon the well-proved principle of time-of-flight measurement of short laser pulses, like all RIEGL products.

Product Name: LMS - Q120i
Company: Riegl USA. Inc

The RIEGL LMS-Q120i laser scanner provides accurate non-contact line scanning using a narrow infrared laser beam. The instrument makes use of the precise time-of-flight laser range measurement principle and of fast line scanning by means of a high-speed opto-mechanical scan mechanism, providing fully linear, unidirectional and parallel scan lines.

Product Name: LMS - Q560
Company: Riegl USA. Inc

The RIEGL LMS-Q560 is a revolutionary 2D laser scanner. It utilizes the latest state-of-the-art digital signal processing, which meets the most challenging requirements in airborne laser scanning.

Product Name: LMS - Z620
Company: Riegl USA. Inc

The terrestrial laser scanner system RIEGL LMS-Z620 consists of a high performance long-range 3D laser scanner, associated operating and processing software RiSCAN PRO, and a calibrated and definitely orientated high-resolution digital camera.

Product Name: LMS-Q500
Company: Riegl USA. Inc

The RIEGL LMS-Q500 2D laser scanner provides accurate non-contact profile measurements based upon precise time-of-flight laser range measurement and fast line scanning of the laser beam. The rugged overall system design makes the LMS-Q500 exceptionally well suited for installations even in very harsh industrial environment.

Product Name: RIEGL DR560
Company: Riegl USA. Inc

The RIEGL DR560 is the companion Digital Data Recorder to the Airborne Laser Scanner RIEGL LMS-Q560 for full waveform analysis.

Product Name: RIEGL LMS-Q560
Company: Riegl USA. Inc

The RIEGL LMS-Q560 is a revolutionary 2D laser scanner using the latest state-of-art digital signal processing, which meets the most challenging requirements in airborne laser scanning.

Product Name: RIEGL LMS-Z620
Company: Riegl USA. Inc

The terrestrial laser scanner system RIEGL LMS-Z620 consists of a high performance long-range 3D laser scanner, associated operating and processing software RiSCAN PRO, and a calibrated and definitely orientated high-resolution digital camera.

Product Name: VZ - 400
Company: Riegl USA. Inc

The new RIEGL VZ-400 3D Terrestrial Laser Scanner provides high speed, non-contact data acquisition using a narrow infrared laser beam and a fast scanning mechanism. High-accuracy laser ranging is based upon RIEGL’s unique echo digitization and online waveform analysis, which allows achieving superior measurement capability even under adverse atmospheric conditions and the evaluation of multiple target echoes.

Product Name: ScanPlus 7™ HD642
Company: Source Graphics

ScanPlus 7 HD642 is a color and monochrome scanner that is the perfect solution for reprographics, graphic arts, GIS and CAD professionals. It incorporates the latest in full color scanning and copying technology and is a cost-effective tool that can be configured for both stand-alone and network scanning and copying tasks directly from the scanner.

Product Name: ScanPlus 7™ MS544
Company: Source Graphics

ScanPlus 7 MS544 44" wide-format monochrome scanner gives companies an easy and affordable way to save time on in-house scanning activities. You get exceptional professional-grade performance with true 1200 dpi optical resolution. Designed for high-volume productivity, the ScanPlus 7 MS544 produces clean, sharp image quality on technical documents, sketches and maps. Fast, simple image clean-up on old, faded or poorly shaded documents, and safe handling of sensitive originals with no data loss in capture.

Product Name: Terrestrial Hyperspectral Scanning
Company: SpecTIR, LLC

In addition to airborne remote sensing collections, SpecTIR has developed techniques for terrestrial hyperspectral data collection, both in the field and indoors. These collection services leverages the same sensor systems, personnel, and expertise of the SpecTIR Remote Sensing division.

Product Name: Colortrac SmartLF Cx 40
Company: support systems ltd

Colortrac SmartLF Cx 40 large format scanners provide fast, high quality scans, copies or digital file distribution of wide format maps, engineering drawings, blueprints, site plans, architectural renderings, newsprint and many other large format technical documents.

Product Name: Colortrac SmartLF Gx 25
Company: support systems ltd

Outstanding performance scanner at affordable prices! Sharp, fast large format technical document scans & copies for professional and in-house users! SmartLF wide format scanners are available in a range of:
  • image widths; 25, 40 or 42 inches
  • monochrome, color or express color
  • scan speeds from 0.75 in/s to 10.1 in/s

Product Name: Colortrac SmartLF Gx/GxT 42
Company: support systems ltd

SmartLF Gx 42 wide format scanners are ideal for professional service providers and reprographics bureaus, copyshops, graphic arts, design, mapping, survey and GIS professionals in any size of enterprise.

Product Name: Terrapoint - TITAN® - Mobile Laser Scanning
Company: Terrapoint

Terrapoint’s TITAN® is a revolutionary mobile scanning system, that performs data acquisition for corridor applications requiring high accuracy and maximum data coverage.


Latest Blog Posts
Jim SparksGISCafe Guest
by Jim Sparks
Maps are (Still) Important Again
Jobs
Geographical Information Systems Analyst for Saalex Solutions at Fallon, Nevada
Applications Programmer Analyst I for Southern Nevada Health District at Las Vegas, Nevada
Applications Programmer Analyst II for Southern Nevada Health District at Las Vegas, Nevada
Upcoming Events
Geo Week, July 27-29-2020 (NEW DATE), at McCormick Place | , IL Chicago IL - Jul 27 - 29, 2020
SPAR 3D & AEC Next Technology Expo + Conference(NEW DATE) at McCormick Place Chicago IL - Jul 27 - 29, 2020
Smart GEO Expo 2020 at COEX Hall C Republic of Korea Seoul Korea (South) - Aug 19 - 21, 2020
IWCE 2020 Conference at Las Vegas Convention Center LAS VEGAS NV - Aug 24 - 28, 2020
University of Denver GIS Masters Degree Online
UAV Expo2020 -Register   & save



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise